Can Masonry Problems Lead to Water Problems in Your Virginia Home?

Masonry Saturation and Leakage in Virginia

Masonry can provide a good moisture barrier. However, there are factors that can lead to water leakage. Some of these factors are:
Masonry saturation solutions by Reliable Waterproofing & Masonry

  • Weather exposure
  • Density of masonry surface
  • Porosity of the masonry unit or mortar joint
  • Voids in masonry

All of these play a role in how resistant the masonry is to water penetration. Saturation happens when water passes through the masonry or absorbs entirely into the masonry wall. The moisture buildup can lead to water entering the living space of your home.

The most common area where masonry saturation causes leaking into the home is where the chimney passes through the roof. If you see staining on the ceiling where the chimney passes through, this is caused by masonry saturation.

Another area of concern for masonry problems are room additions. The leak commonly occurs at the top of the interior opening of the addition. Any opening in a masonry structure with exposed masonry above can result in leaking. Any time exposed masonry above a room opening leaks, it is probably due to masonry saturation. If you see signs that you have water leaking into your home due to masonry saturation, the experts at Reliable Waterproofing & Masonry can help.

Masonry Saturation Solutions in Virginia

The professionals at Reliable Waterproofing & Masonry will come and inspect your home for masonry saturation. Some of the things we will look for and repair are:

  • Obvious voids that need tuck pointing on the exterior masonry surface
  • Check for voids in the flashing and raise the height
  • Exterior problems can be repaired with waterproofing products

When determining the cause of water leaking into your home, masonry saturation is sometimes overlooked. Leakage diagnoses can be a tedious process. Let the experts at Reliable Waterproofing & Masonry give you a free inspection and find the source of the leakage and do the proper repair needed to keep water out of your home.

We do brick re-pointing to keep water from entering your home. This process starts by removing any old pointing to a depth equal or slightly more than the width of the joint. Then new mortar is installed using the same color as the original mortar. The mortar will take a day to set.

We have over 30 years of experience in waterproofing, foundation repair and masonry services. We will inspect your home for masonry saturation and repair the water leakage into your home. We use only the best products available for masonry repair. If you are in need of masonry repair, don’t hesitate to contact the professionals at Reliable Waterproofing & Masonry. We have the solutions for you and will stop water leakage due to masonry saturation. Contact us today!