Tag Archives: mortar

Can Masonry Problems Lead to Water Problems in Your Virginia Home?

Masonry Saturation and Leakage in Virginia

Masonry can provide a good moisture barrier. However, there are factors that can lead to water leakage. Some of these factors are:
Masonry saturation solutions by Reliable Waterproofing & Masonry

  • Weather exposure
  • Density of masonry surface
  • Porosity of the masonry unit or mortar joint
  • Voids in masonry

All of these play a role in how resistant the masonry is to water penetration. Saturation happens when water passes through the masonry or absorbs entirely into the masonry wall. The moisture buildup can lead to water entering the living space of your home.

The most common area where masonry saturation causes leaking into the home is where the chimney passes through the roof. If you see staining on the ceiling where the chimney passes through, this is caused by masonry saturation.

Another area of concern for masonry problems are room additions. The leak commonly occurs at the top of the interior opening of the addition. Any opening in a masonry structure with exposed masonry above can result in leaking. Any time exposed masonry above a room opening leaks, it is probably due to masonry saturation. If you see signs that you have water leaking into your home due to masonry saturation, the experts at Reliable Waterproofing & Masonry can help.

Masonry Saturation Solutions in Virginia

The professionals at Reliable Waterproofing & Masonry will come and inspect your home for masonry saturation. Some of the things we will look for and repair are:

  • Obvious voids that need tuck pointing on the exterior masonry surface
  • Check for voids in the flashing and raise the height
  • Exterior problems can be repaired with waterproofing products

When determining the cause of water leaking into your home, masonry saturation is sometimes overlooked. Leakage diagnoses can be a tedious process. Let the experts at Reliable Waterproofing & Masonry give you a free inspection and find the source of the leakage and do the proper repair needed to keep water out of your home.

We do brick re-pointing to keep water from entering your home. This process starts by removing any old pointing to a depth equal or slightly more than the width of the joint. Then new mortar is installed using the same color as the original mortar. The mortar will take a day to set.

We have over 30 years of experience in waterproofing, foundation repair and masonry services. We will inspect your home for masonry saturation and repair the water leakage into your home. We use only the best products available for masonry repair. If you are in need of masonry repair, don’t hesitate to contact the professionals at Reliable Waterproofing & Masonry. We have the solutions for you and will stop water leakage due to masonry saturation. Contact us today!

 

Masonry and Brick Problems to Watch for in Your Virginia Home

Symptoms of Masonry and Brick Problems in Virginia

Masonry and brick are subject to deterioration, especially at the mortar Brick and masonry repair in Northern Virginiajoints. Mortar consists primarily of lime and sand so over time, this lime and sand can deteriorate due to rain and other sources of water. Look around your Northern Virginia home and look for some of the symptoms of masonry and brick problems such as:

  • Settlement cracks – These masonry cracks are usually stair-step cracks in your masonry. 
  • Expansion cracks – A vertical of stair-step crack that is usually located in the upper portions of the masonry can be caused by thermal expansion. Bricks expand when heated by the sun and if expansion joints are not present, can cause cracks.
  • Steel expansion cracks – Cracks that occur at the upper corners of doorways, garage doors, or windows is usually caused by the steel lintels that support the masonry above these openings.
  • Bulging or bowed wall cracks – Cracks can appear throughout an entire wall or the wall is bulged or bowed. This is usually the symptom of age related failure due to improper reinforcement of the masonry.

If you see any of these signs of masonry or brick problems, contact the professionals at Reliable Waterproofing & Masonry. We have the solutions for your masonry and brick problems. 

Brick and Masonry Solutions from Reliable for Virginia Homes

Water entering through any voids you may have in your masonry or brick

Masonry and brick repair in Richmond, VA

After re-pointing

can cause significant damage to your home. Reliable Waterproofing & Masonry uses the process of re-pointing to remove any old point to a depth of equal to or slightly more than the width of the joint. Depending on the depth of the joint, one or more pases will be made with the mortar and we will match the color of the current mortar. The mortar will take a day to set and cure.

You can be reassured that the products we use are the best in the industry and the new mortar will match the original mortar type, color and texture of the existing mortar to avoid incompatible materials and make sure that it looks good as new.

Reliable Waterproofing & Masonry can also repair any chimney repair you needs. Don’t ignore a chimney that is leaning or is in need of brick repair. This can be a danger to you and your home.

For any of your masonry and brick repair in the Northern Virginia area including the cities of Richmond, Petersburg, and Hanover, contact the professionals at Reliable Waterproofing & Masonry. We have over 30 years of experience in the Northern Virginia area. We will get your masonry and brick repair done and your home will look like new. Don’t let the cracks in your bricks be ignored. The sooner they are repaired, the least amount of damage that will occur to your home. Contact us today!

What is Brick Re-Pointing?

No matter what, if you have masonry in or around your home, you can be sure that the elements will have major effects on it. Rain, wind, and frost all can have negative effects on you masonry, and along with time, wear and tear, and decay, your brick walls will need some extra help to keep them in their best shape. If not taken care of, the pointing will begin to crack and create voids, letting in water and moisture that will get into your bricks and into your home. This will allow mold and mildew to grow in and around your home, and since half of the air you breathe in your home comes from your basement, it’s safest to get rid of that moisture as soon as possible. It will also cause cracking in your walls and foundation, water stains, and damage to your possessions, it’s just smart to get this problem fixed as soon as possible.

Professionals in Brick Re-Pointing VirginiaBrick Re-Pointing Virginia

The first part of the re-pointing process is to remove any old pointing to a depth equal to or slightly more than the width of the joint. Depending on the depth of the joint one or more passes will be made with the mortar (which can be made to match the current color of your mortar). The mortar will then take about a day to set up and cure. It is very important to make sure that the joint profile is rectangular as the new mortar used needs ample chance to bond with the existing masonry. We try very to hard to match up our mortar to your original mortar, this is important to the process, because they need to have similar characteristics such as strength and permeability.

We want to make sure your home, and its masonry, is in great shape all the time. We can help you do that. We have a great team of experienced professionals who are knowledgeable in all of our waterproofing and masonry repairs and processes. We at Reliable Waterproofing & Masonry are ready to help you with all your brick re-pointing Virginia needs. Give us a call today!